I have a Honeywell Quick Start Alarm Kit (Siren-based alarm), and none of the Remote Controls are linked. How do I link the remote control key fob to the Siren?

  1. Unscrew and remove the battery cover on the Siren

    bss_external_siren_8 ka_configuring_siren_4

  2. Locate the row of DIP switches and ensure DIP switch 5 is set to ‘ON’


  3. Locate the ‘LEARN’ button inside the battery compartment of the Siren.
  4. Press and hold the ‘LEARN’ button for 5 seconds


  5. The Siren will emit a single short beep and both the Comfort LEDs and the Learn LED will flash together slowly once every 2 seconds. The Siren will remain in Learn Mode for 30 seconds.

  6. Press the Disarm button on the remote control key fob once


  7. The Siren will respond by beeping.