Peace of mind
Simple, reliable, and hassle-free, Honeywell Home’s new range of Home Alarms have been designed with your safety and security in mind. Sleep soundly safe in the knowledge that your family and home are protected at night with At Home Zoning Mode, which protects important entry points while still allowing you to move around the house.
- Event Alerts tell you if the alarm has been triggered while you were away
- Preventative Prompts warn you if you’ve left a window or door open
- Tamper Alerts let you know if your alarm system has been tampered with
- Wireless external sirens provide a visible deterrent with flashing LEDs and a loud 105 dB alert in emergencies
Easy to install
Honeywell Home Home Alarm Kits have been designed to be easily installed, with all the accessories pre-linked and ready to go out of the box. All fixings and batteries are also included, so there’s nothing more to buy, and there’s even optional screw-free installation on most accessories with the included sticky pads.
Easy to use
You’ll absolutely love how simple it is to use your new Honeywell Home Home Alarm, and so will your family. Simply arm and disarm the alarm system with one touch by using the keypad and contactless tags, or with the wireless remote control key fob from up to 150m away. For the ultimate in simplicity, you can also operate your alarm system with the innovative keypad by using a PIN code.
Easy to maintain
With a long battery life of up to two years, you won’t need to worry about your Honeywell Home Home Alarm after you have installed it. Conveniently located low battery indicators on each accessory will notify you when it’s finally time to change the batteries, and the easy-open battery compartments makes the process as easy as 1-2-3.
Reliability and quality
Honeywell Home ActivLink®, using the 868MHz frequency, is our innovative wireless protocol which delivers greater range capability of up to 200m, extended battery life of up to 2 years, and improved connection reliability with no false triggering, all supported by our 2 year product quality guarantee.
Flexible and expandable
There’s a Honeywell Home Home Alarm to suit every home and every family. You can start with a smaller kit, then add up to 44 accessories or devices to your system, and activate and control up to 3 separate zones to suit your lifestyle and needs. You can even link any number of Honeywell Home Doorbells to your Honeywell Home Home Alarm to function as additional internal sirens.
I have a Honeywell Quick Start Alarm Kit (siren-based). How do I replace the batteries on my wireless door and window sensors or indoor wireless motion sensors (PIR)?
- Place the Siren into Service Mode by pressing and holding the ‘Disarm’ button on your remote control for 5 seconds. The Siren will produce 2 short beeps followed 1 second later by a single long beep. The Siren LEDs will flash together in conjunction with the beeps.
- For wireless door and window sensors, remove the battery cover by sliding it down. Replace the battery, ensuring correct polarity and battery type, and close the cover.
- For wireless motion sensors, remove the battery cover by pressing the button at the bottom and pulling it out towards you. Replace the batteries, ensuring correct polarity and battery type, and close the cover. Please note that the sensor will take up to 30 seconds to re-initialise following battery replacement.
- Exit Service Mode by pressing and holding the ‘Disarm’ button on your remote control for 5 seconds. The Siren will produce 1 long beep followed 1 second later by 2 short beeps. The Siren LEDs will flash together in conjunction with the beeps.