Wireless push button with nameplate and LED confidence light – Offset Landscape, Grey
The Honeywell Home DCP511GA wireless push button combines great functionality with a best in class design. It comes with a LED confidence light which indicates that the push is working, a nameplate, and the Secret Knock function plays a different melody, so you know it’s a family member or friend at the door.
Peace of mind
Peace of mind for visitors, thanks to a LED confidence light on the push button, and peace of mind for you, thanks to the Secret Knock function which plays a different melody, so you know if it's a family member or friend at the door.
Our products are stocked in many home and DIY outlets across New Zealand. Alternatively you can buy this product directly from the following websites.
Honeywell Home Doorbell Kits
that work with the DCP511GA Wireless push button with nameplate and LED confidence light – Offset Landscape, Grey
Frequently asked questions
Yes, it is possible to link as many Honeywell Home doorbells as you wish to a Honeywell Home push button via Honeywell Home ActivLink® technology. This will allow you to place doorbells in different locations throughout your property. Honeywell Home offers kits in this type of configuration with two doorbells and a push button. Please refer to the products available in your country.
If you have associated your push button to a downloaded melody and you subsequently delete that melody, by default the push button will play the next available downloaded melody, if any are present, or it will default to one of the standard melodies available on the DC917xx MP3 Doorbell.
If you have more than one push button, deleting an MP3 melody that is associated to a specific push button will affect the other push buttons in the system. To change the melody associated with each push button, press the specific push button, then press the melody button on the doorbell until you hear your desired melody.
Check if Bell Wire is used. If not, we suggest replacing the existing wire with Bell Wire.
Check if there is an adequate length of bare wire exposed, and that it is not folded. 8-9mm of exposed bell wire is recommended.
Yes, the push button is waterproof ( IP55) and is protected from rain showers.
No. This is not advisable as the push button is designed to work with the wall bracket for easy battery maintenance. Sticking the push button directly on the door frame without the wall bracket will make it difficult for you to change the batteries in the future.
No. It is not advisable to mount the push button onto metal surfaces as the material can block wireless signals between the push button and the doorbell. However, if this is the only option then we recommend that you use the sticky pad provided as opposed to using the provided screws.
Yes, all push buttons are supplied with countersink screws suitable for wood and UPVC surfaces. For other applications you may need to source suitable screws and wall plugs.
- Remove the push button from its bracket by using a screwdriver to press the release tab and slide the push off the bracket.
- Locate the round battery cover, and using a coin, turn the battery cover 60°anti-clockwise. The battery cover will now be released from the back cover.
- Replace the CR2032 coincell battery.
- Refit the battery cover by aligning the arrow on the battery cover with the open lock symbol on the back cover. Press and turn 60°clockwise.
- Relocate the push on the bracket, ensuring that it is locked in position.
Yes, you can do this for as many push buttons as your doorbell can store in its memory. Your push button must first be already linked to your doorbell. Press your push button 3 times in quick succession. The doorbell will now sound the same melody as when you press the push button once. Now press the melody button on your doorbell one or more times until you hear the melody you want to select for the "Secret Knock". Where applicable, you can now press the Sun button one or more times to select the desired Halo colour for the "Secret Knock".
Your push button must first be already linked to your doorbell. Press your push button 3 times in quick succession. The doorbell will now sound the same melody as when you press the push button once. Now press the melody button on your doorbell one or more times until you hear the melody you want to select for the "Secret Knock". Where applicable, you can now press the sun button one or more times to select the desired Halo colour for the "Secret Knock".
Your push button, sensor or other device must first be already linked to your doorbell. To change the Halo colour, press the push button or trigger the sensor by walking in front of it or opening the door or window. When the Halo Light on your doorbell flashes, press the Sun button on the doorbell one or more times to select a different halo colour. You have 12 seconds to complete the operation.
Your push button, sensor or other device must first be already linked to your doorbell. To change the melody for a specific device, press the push button or trigger the sensor by walking in front of it or opening the door or window. When the doorbell plays a melody, press the melody button on the doorbell one or more times to select a new melody.
Press and hold the settings button on the doorbell until an amber light flashes, either from the small LED indicator on the side of the doorbell, or from the Halo Light (Depending on product type). Press the push button. Doorbell will play a melody. Your push button is now linked.
Check if the push button has been jammed in the closed position which may result in the push button light not being powered. If so, release the jammed button and ensure that there is no restriction on its movement.
If Wired Push Button light is still not functional, the light element may have failed. If so, you may need to replace the Wired Push Button module.
Check to see if the battery needs replacing, by replacing the CR2032 coin cell battery.
Honeywell Home offers a 2 year Guarantee on all Doorbell kits, Alarm kits, and accessories.
The Quick Start Guides and Installation Manuals are available from this website. Please refer to the relevant product page or further down in this Support Section.
The Doorbell and Push Button contain no serviceable parts, except for replacement of batteries.
Unfortunately Honeywell Home do not currently offer such components separately.